De Donato Giulio
Giulio De Donato was born in Cork, Ireland. He received the M.S. and Ph.D. degrees in electrical engineering from the University of Rome “La Sapienza,” Rome, Italy, in 2003 and 2007, respectively.
He was a Research Associate with the Department of Electrical Engineering, University of Rome “La Sapienza”, from 2007 to 2008; from 2008 to 2019 he was an Assistant Professor with the Department of Astronautical, Electrical and Energy Engineering. Since 2019 he has been an Associate Professor with the same department.
He is Co-PI of a collaborative research agreement between the DIAEE and the Department of Electrical, Electronic Engineering, and Computer Science, University of Catania, for research in the field of wide-bandgap semiconductor-based drives. His current research interests include digital control of brushless drives, analysis and design of permanent-magnet machines, and wide-bandgap-semiconductor-based power converters.
Prof. De Donato is a Senior Member of the IEEE and a member of the IEEE Industry Applications, the IEEE Industrial Electronics and the IEEE Power Electronics Societies. He is a member of the IEEE IAS Industrial Drives Committee, the IAS Electric Machines Committee, the IES Electrical Machines Committee and the PELS Technical Committee on Electrical Machines, Drives and Automation. Presently he is an officer of the IEEE Electric Machine Committee. He received the 2014 First Prize Paper Award and the 2016 Third Prize Paper Award, both from the IAS Industrial Drives Committee. He is currently serving as an Associate Editor for the IEEE Transactions on Industry Applications and IEEE Transactions on Power Electronics.
Giulio De Donato é nato a Cork, in Irlanda. Ha ottenuto la Laurea ed il Dottorato di Ricerca in Ingegneria Elettrica dall'Università degli Studi di Roma "La Sapienza" rispettivamente nel 2003 e nel 2007.
E' stato Assegnista di Ricerca presso il Dipartimento di Ingegneria Elettrica dell'Università degli Studi di Roma "La Sapienza" dal 2007 al 2008; dal 2008 al 2019 é stato Ricercatore Universitario presso il Dipartimento di Ingegneria Astronautica, Elettrica ed Energetica. Dal 2019 é Professore Associato presso lo stesso Dipartimento.
E' Responsabile Scientifico per un accordo di collaborazione tra il DIAEE ed il DIEEI, Università degli Studi di Catania, per la ricerca nel campo dei convertitori, delle macchine e degli azionamenti elettrici basati su dispositivi di potenza a banda proibita larga. La sua ricerca attuale verte sul controllo digitale di azionamenti sincroni brushless, sull'analisi e la progettazione di macchine sincrone, e sull' analisi e la progettazione di convertitori di potenza basati su dispositivi di potenza a banda proibita larga.
Il Prof. De Donato é Senior Member della IEEE ed é membro delle IEEE Industry Applications, IEEE Industrial Electronics ed IEEE Power Electronics Societies. E' anche membro dell'IEEE IAS Industrial Drives Committee, dell'IAS Electric Machines Committee, dell'IES Electrical Machines Committee e del PELS Technical Committee on Electrical Machines, Drives and Automation. Attualmente é nel direttivo dell'IAS Electric Machines Committee. Ha ricevuto il 2014 First Prize Paper Award ed il 2016 Third Prize Paper Award, entrambe dall'IAS Industrial Drives Committee. E' attualmente un Associate Editor per le riviste IEEE Transactions on Industry Applications ed IEEE Transactions on Power Electronics.
1. F. Marcolini, G. De Donato, F. Giulii Capponi, and F. Caricchi,"Direct Oil Cooling of End-Windings in Torus-Type Axial-Flux Permanent-Magnet Machines," IEEE Transactions on Industry Applications, vol. 57, no. 3, p. 2378-2386, May/Jun. 2021.
2. R. Rocca, F. Giulii Capponi, G. De Donato, S. Papadopoulos, M. Rashed, F. Caricchi and M. Galea, "Actual Design Space Methodology for Preliminary Design Analysis of Switched Reluctance Machines," IEEE Transactions on Industry Applications, vol. 57, no. 1, p. 397-408, Jan/Feb. 2021.
3. R. Rocca, F. Giulii Capponi, S. Papadopoulos, G. De Donato, M. Rashed and M. Galea, "Optimal Advance Angle for Aided Maximum-Speed-Node Design of Switched Reluctance Machines," IEEE Transactions on Energy Conversion, vol. 35, no. 2, p. 775-785, Jun. 2020.
4. G. De Donato, G. Scelba, M. Pulvirenti, G. Scarcella, and F. Giulii Capponi, “Low-Cost, High-Resolution, Fault-Robust Position and Speed Estimation for PMSM Drives Operating in Safety-Critical Systems,” IEEE Transactions on Power Electronics, vol. 34, no. 1, p. 550-564, Jan. 2019. Open Access: https://ieeexplore.ieee.org/document/8326516
5. J. Garcia, P. Garcia, F. Giulii Capponi, and G. De Donato, “Analysis, Modeling and Control of Half-Bridge Current-Source Converter for Energy Management of Supercapacitor Modules in Traction Applications,” Energies, vol.11, no.9, 2239, Sep. 2018. [Online]. Open Access: https://www.mdpi.com/1996-1073/11/9/2239
6. G. Borocci, F. Giulii Capponi, G. De Donato, and F. Caricchi, “Closed-Loop, Flux-Weakening Control of Hybrid-Excitation Synchronous Machines”, IEEE Transactions on Industry Applications, vol. 53, no. 2, p. 1116-1126, Mar./Apr. 2017.
7. G. De Donato, G. Scelba, G. Borocci, F. Giulii Capponi, and G. Scarcella, “Fault-Decoupled Instantaneous Frequency and Phase Angle Estimation for Three-Phase Grid-Connected Inverters”, IEEE Transactions on Power Electronics, vol. 31, no. 4, p. 2880-2889, Apr. 2016.
8. G. Scelba, G. De Donato, M. Pulvirenti, F. Giulii Capponi, and G. Scarcella, “Hall-Effect Sensor Fault Detection, Identification and Compensation in Brushless DC Drives”, IEEE Transactions on Industry Applications, vol. 52, no. 2, p. 1542-1554, Mar./Apr. 2016.
9. F. Giulii Capponi, G. Borocci, G. De Donato, and F. Caricchi, “Flux Regulation Strategies for Hybrid-Excitation Synchronous Machines”, IEEE Transactions on Industry Applications, vol. 51, no. 5, p. 3838-3847, Sep./Oct. 2015.
10. G. De Donato, F. Giulii Capponi, G. Borocci, F. Caricchi, L. Beneduce, L. Fratelli, and A. Tarantino, “Ω-Shaped Axial-Flux Permanent-Magnet Machine for Direct-Drive Applications with Constrained Shaft Height”, IEEE Transactions on Industry Applications, vol. 51, no. 4, p. 3050-3058, Jul./Aug. 2015.